The ServeRAID-3L was replaced by the ServeRAID-3L II (part 19K0564) in April 2000. The internal connector of the
ServeRAID-3L II adapter has been redesigned so that the adapter will fit in 3U servers, such as the Netfinity 4500R. This board
design is the only difference. In fact, the two adapters are the same FRU, 01K7352.
ServeRAID-3H
(part 01K7207, 1998)
US Announcement Letter:
198-232
Visual identifiers:
Two external VHDCI connectors, labeled "LVD/SE"
Single internal 68-pin industry-standard SCSI connector
Connector on the top edge of the card with EDO memory DIMM installed
Might have an optional daughter card with a battery pack (part 28L1003) installed into the connector near the handle.
This adapter looks similar to the ServeRAID-3HB.
64-bit PCI connector (long)
Note
: The adapter also includes a cable similar to ServeRAID II option to route the internal channel 3 connector to an external
VHDCI connector (not shown).
ServeRAID-3HB
(part 37L6086, 1999)
US Announcement Letter:
199-152
Visual identifiers:
