IBM ServeRAID M5025, User Manual

Page: 65 / 86

Monitoring the IBBU with the MegaRAID Configuration Utilities 6-9
6.1.2.4 Display BBU Design Parameters
Use the command in Table 6.4 to display BBU design parameters for the
selected controller(s).
6.1.2.5 Display Current BBU Properties
Use the command in Table 6.5 to display the current BBU properties for
the selected controller(s).
Description Displays BBU capacity information. The information displays in the following format:
BBU Capacity Info for Adapter: x
Relative State of Charge: xx%
Absolute State of Charge: xx%
Remaining Capacity: xx mAh
Full Charge Capacity: xx mAh
Run Time to Empty: xxx Min
Average Time to Empty: xxx Min
Average Time to Full: xxx Min
Cycle Count: xx
Max Error: xx%
Table 6.3 Display BBU Capacity Information (Cont.)
Table 6.4 Display BBU Design Parameters
Convention
MegaCli -AdpBbuCmd -GetBbuDesignInfo –aN|-a0,1,2|-aALL
Description Displays information about the BBU design parameters. The information displays in
the following formats:
BBU Design Info for Adapter: x
Date of Manufacture: mm/dd, yyyy
Design Capacity: xxx mAh
Design Voltage: mV
Serial Number: 0xhhhh
Pack Stat Configuration: 0xhhhh
Manufacture Name: XXXXXX(String)
Device Name: XXXXXX(String)
Device Chemistry: XXXXXX(String)
Table 6.5 Display Current BBU Properties
Convention
MegaCli -AdpBbuCmd -GetBbuProperties –aN|-a0,1,2|-aALL