IBM ServeRAID-4 Ultra160 Series, User Reference

Page: 64 / 208

6. In the Main Tree, click the first ServeRAID controller that you want to
configure.
7. Click (
Configure for clustering
) on the tool bar. The Configure
controller for clustering window opens.
8. Provide the following information.
Notes:
a. The controller name and partner name are case sensitive.
b. If your configuration will contain multiple ServeRAID controller pairs, each
controller name must be unique.
Controller name
Enter a name to identify the first controller, for example, Controller A.
Partner name
Enter a name that you will use to identify the second controller, for
example, Controller B.
SCSI initiator IDs
The system presets these IDs to 7. Set each ID to 6 for shared
channels.
Note: The ServeRAID Manager program does not permit you to enter
numbers other than 6 and 7.
9. Click OK.
10. In the Main Tree, click the second ServeRAID controller that you want to
configure.
11. Click (
Configure for clustering
) on the tool bar. The Configure
controller for clustering window opens.
Figure 17. Configure controller for clustering window
46
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller