IBM ServeRAID-4 Ultra160 Series, User Reference

Page: 54 / 208

8. When creating your logical drives, you might change your mind about the
arrays you created. If so, you can:
v
Remove a specific drive from a newly defined array or delete an entire
newly defined array. To do this, click Back; then, using the right mouse
button, click the specific drive or Array icon in the Main Panel on the right.
Select Remove from new array or Delete new array.
v
Remove a specific hot-spare drive or all newly defined hot-spare drives. To
do this, click Back; then, using the right mouse button, click the Hot-spare
drive icon in the Main Panel on the right, and then select Remove new
hot-spare drive or Remove all new hot-spare drives.
9. Select a RAID level for the logical drive from the RAID pull-down menu in the
Main Panel. (Refer to “Supported RAID levels” on page 15.)
10. If you do not want to use the maximum size for the logical drive, move the
sliding bar in the Main Panel from right to left to allot data and parity space for
the logical drive, or type in the size in the data field.
Notes:
a. You can define from one to eight logical drives.
Figure 13. Create logical drives window
36
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller