IBM SAN42B-R, Installation, Service And User Manual

Page: 28 / 96

1
- System status LED
2
- System power LED
3
- USB port
4
- Ethernet management port
5
- Console port (RJ-45)
6
- Serial number pull-out tab
7
- 16 GbE FC ports (24)
8
- 40 GbE FCIP ports (QSFP) (2)
9
- 1/10 GbE FCIP ports (16)
The Fibre Channel ports and FCIP ports are numbered from left to right on the
faceplate, as shown in Figure 2.
1
- FC ports (16 GbE) 0 through 7
2
- FC ports (16 GbE) 8 through 15
3
- FC ports (16 GbE) 16 through 23
4
- FCIP ports (40 GbE) 0 and 1 (QSFP)
5
- FCIP ports (1/10 GbE) 2 through 9
6
- FCIP ports (1/10 GbE) 10 through 17
You can have two Trunk groups on a fully licensed switch. Group 1 consists of FC
ports 0 through 7 and group 2 is ports 8 through 15.
Nonport side of the switch
Figure 3 on page 5 shows the nonport side of the switch, which contains two
power supply FRUs and three fan FRUs.
7 8 9
1
2
5 3 4 6
b42r001
Figure 1. Port side view of the SAN42B-R
1 2 3 4 5 6
b42r002
Figure 2. Port numbering in the switch
4
SAN42B-R Installation, Service, and User Guide