Chapter 2. 7043–150 System Features
This chapter contains information specific to both the 250MHz and 375MHz options for
the Model 150, and applies to the RS/6000 7043 43P Series User’s Guide and the
RS/6000 7043 43P Series Service Guide. All other information is consistent with the
system books.
System Features
Bus Architecture
Five 32-bit PCI adapter slots are available:
v
Slots 2 and 3, primary
v
Slots 1, 4, and 5, secondary
Microprocessor
v
PowerPC 604e 250 MHz with 1MB parity synchronous L2 cache
v
PowerPC 604e 375 MHz with 1MB parity synchronous L2 cache
Memory
v
64MB-1GB
v
4 memory module sockets for 64MB, 128MB, or 256MB dual inline memory-module
kit with ECC SDRAM EDO (extended data out)
Diskette Drive
v
Standard: 3.5-inch, 1.44MB
Drives
Hard Disk Drives
v
4.5GB, 9.1GB, and 18.2GB Ultra drives
v
Maximum supported: 3 internal
CD-ROM Drive
v
32x speed 5.25-inch, with sliding tray (no caddy required)
Other Drives
v
Drive bays can accommodate 5.25-inch or 3.5-inch drives, such as hard disk drives,
CD-ROM drives, tape drives, or other removable media drives.
Power Supply
v
Autoranging 250 watt, usable with 115 V ac or 230 V ac (Supports Wakeup-on-LAN)
7
Summary of Contents for RS/6000 7043 43P Series
