IBM RackSwitch G8332, Product Manual

Page: 7 / 18

IBM System Networking RackSwitch G8332 7
Table 2. Software features (part 3 of 3)
Item Description
Monitoring Port mirroring

ACL-based mirroring

ACL logging

Processor logging

sFlow

UDLD

Virtualization VMready

Clients System Networking Switch Center (SNSC)

isCLI (Cisco-like)

Browser-based client or Telnet

Standard protocols DHCP Client

DHCP Relay

LLDP

160K MAC Table

9 K Jumbo Frames

802.3X Flow Control

802.1x

Precision Time Protocol (PTP)

Popular configurations
This section describes some configurations for the RackSwitch G8332.
40 G aggregation switch for east-west traffic
As more clients seek to flatten their networking to use more of an east-west traffic flow that is required by
many of today’s applications and especially virtualized environments, the RackSwitch G8332 is an ideal
tier-two switch for connecting multiple access switches or interconnect modules.
One example is when the RackSwitch G8332 is combined with IBM RackSwitch G8264 by using SFP+ or
G8264T using 10Gbase-T to the compute nodes, where clients can easily support up to 1536 nodes on 10
Gigabit Ethernet network with as few as a 3:1 oversubscription. Alternatively, clients can also build a
smaller network by using the G8264CS while using the Omni Port to connect to their FC/FCoE SAN, as
shown in Figure 3 and Figure 4.
Figure 3. Aggregation switch for east-west traffic