Initial configuration
Enter the network information you gathered earlier.
Procedure
1.
Press
Enter
on the LCD panel.
″
Appliance PIN
″
appears in the LCD menu.
2.
If you want to specify a personal identification number that users must enter to
configure the appliance, press
Enter
, specify a 4-digit number in the field
provided, and then press
Enter
again.
Note:
Use the
Up
and
Down
buttons to specify digits and the
Right
and
Left
buttons to navigate between the fields.
3.
To configure the appliance to communicate with other devices, navigate to the
Configuration menu (using the
Up
and
Down
buttons), then press
the
Enter
button to go into the network configuration. Enter the
information the same way you entered information in Step 2.
v
IP Address (required)
v
Subnet Mask
v
Default Gateway
v
DNS Server
v
Host Name
Note:
A reboot occurs after you complete your network configuration.
Next Steps
Install a Console
Select a local workstation on which to install a SiteProtector Console.
Procedure
1.
From this local workstation, point a Web browser to the Proventia Management
SiteProtector SP2001’s management address:
https://
<configured
address>
:3994
.
2.
Read and accept the End User License Agreement. The system then displays
the Proventia Management SiteProtector SP2001 home page with the following
three links:
IBM Proventia Management SiteProtector SP2001 Quick Start Guide
3
