IBM Power Systems 8247-42L, Manual

Page: 51 / 228

c.
With the removal tool (A) sitting on top of the system processor module, push down on the tool
to lock the system processor module into the tool, as shown in Figure 36 on page 34. Make sure
that both of the tool jaws are locked on the system processor module. Do not press the blue
release tabs until directed to do so later.
Note: The tool drops slightly when you push the tool down so that the jaws can grab the bottom
of the system processor module.
A
B
B
C
C
P8EDE512-3
Figure 35. Lowering the removal tool onto the system processor module
System backplane
33