IBM Power Systems 8001-22C, Manual

Page: 42 / 138

What to do next
Prepare the system for operation. For instructions, see “Preparing the 8001-22C system for operation after
you remove and replace internal parts” on page 94.
Installing a PCIe adapter in the 8001-22C system
Learn how to install Peripheral Component Interconnect Express (PCIe) adapters in the IBM Power
System S822LC for Big Data (8001-22C).
About this task
You can install full-length, half-length or short (low-profile) PCIe adapters in the system. If you need to
change the tail-stock of the PCIe adapter from one size to another, so that the adapter fits properly in the
socket, see Removing and replacing the tailstock on a PCIe adapter.
The features listed in Table 5 are electromagnetic compatibility (EMC) Class B features. See the Class B
Notices in the Hardware Notices section.
Table 5. Electromagnetic compatibility (EMC) Class B features
Feature Description
EKAA Broadcom (LSI) MegaRAID 9361-8i SAS3 Controller with 8 Internal Ports (1 GB Cache)
PCIe3.0 x8 LP with cables (Adapter FRU number: AOC-K-9361-8IS-IB001 and
AOC-K-9361-8IB-IB001)
EKAJ NVIDIA Tesla K80 24 GB GPU Accelerator (Adapter FRU number: AOC-KIT-NVK80-
IB001)
EKA3 Intel 82575EB dual-port Gigabit Ethernet Controller PCIe x4.0 LP (Adapter FRU
number: AOC-SG-I2)
EKAT Alpha-data CAPI Adapter: ADM-PCIe KU3 (Adapter FRU Number: ADM-PCIE-KU3)
Figure 22. Installing the processor air baffle
26
Power Systems: Installing the IBM Power System S822LC for Big Data (8001-22C)