background image

If you are viewing this information in softcopy, the photographs and color illustrations may not appear.
The drawings and specifications contained herein shall not be reproduced in whole or in part without the

written permission of IBM.
IBM has prepared this information for use with the specific machines indicated. IBM makes no

representations that it is suitable for any other purpose.
IBM's computer systems contain mechanisms designed to reduce the possibility of undetected data

corruption or loss. This risk, however, cannot be eliminated. Users who experience unplanned outages,

system failures, power fluctuations or outages, or component failures must verify the accuracy of

operations performed and data saved or transmitted by the system at or near the time of the outage or

failure. In addition, users must establish procedures to ensure that there is independent data verification

before relying on such data in sensitive or critical operations. Users should periodically check IBM's

support websites for updated information and fixes applicable to the system and related software.

Homologation statement

This product may not be certified in your country for connection by any means whatsoever to interfaces

of public telecommunications networks. Further certification may be required by law prior to making any

such connection. Contact an IBM representative or reseller for any questions.

Accessibility features for IBM Power servers

Accessibility features assist users who have a disability, such as restricted mobility or limited vision, to

use information technology content successfully.

Overview

The IBM Power servers include the following major accessibility features:
• Keyboard-only operation
• Operations that use a screen reader
The IBM Power servers use the latest W3C Standard, WAI-ARIA 1.0 (www.w3.org/TR/wai-aria/),

to ensure compliance with ICT Accessibility 508 Standards and 255 Guidelines (https://www.access-

board.gov/ict/) and Web Content Accessibility Guidelines (WCAG) 2.0 (www.w3.org/TR/WCAG20/). To

take advantage of accessibility features, use the latest release of your screen reader and the latest web

browser that is supported by the IBM Power servers.
The IBM Power servers online product documentation in IBM Documentation is enabled for accessibility.

For more information about IBM's commitment to accessibility, see the IBM accessibility website at IBM

Accessibility (https://www.ibm.com/able/).

Keyboard navigation

This product uses standard navigation keys.

Interface information

The IBM Power servers user interfaces do not have content that flashes 2 - 55 times per second.
The IBM Power servers web user interface relies on cascading style sheets to render content properly and

to provide a usable experience. The application provides an equivalent way for low-vision users to use

system display settings, including high-contrast mode. You can control font size by using the device or

web browser settings.
The IBM Power servers web user interface includes WAI-ARIA navigational landmarks that you can use to

quickly navigate to functional areas in the application.

14  Power Systems: Installing the IBM Power S1014 (9105-41B)

Summary of Contents for Power S1014







































Reviews: