IBM Power 750 Express 8408-E8D, Manual

Page: 44 / 66

Table 3. Tasks to install the server into a rack (continued)
Task Where to find associated information
Connect your expansion unit, disk drives, and PCI
adapters, if applicable.
Notes:
v Consult your project manager or read the system plans
before moving or installing any disk drives and PCI
adapters.
v
Do not power on your system. You will be instructed
to power on the system when you set up the console.
For more information, see Enclosures and expansion
units (http://publib.boulder.ibm.com/infocenter/
systems/scope/hw/topic/p7ham/expansionunit.htm),
Disk drives (http://publib.boulder.ibm.com/infocenter/
systems/scope/hw/topic/p7hal/
p7halkickoff_75x_76x.htm), and .http://
publib.boulder.ibm.com/infocenter/systems/scope/hw/
topic/p7hak/p7570pci_75x_76x.htm (http://
publib.boulder.ibm.com/infocenter/systems/scope/hw/
topic/p7hak/p7570pci_75x_76x.htm).
Cable the mouse, keyboard, and monitor, if required. For instructions, see “Connecting the monitor, keyboard,
and mouse to the system” on page 25.
Cable the system and set up a console, interface, or
terminal. For instructions, see “Cabling the server and setting up
the console” on page 19.
Connect the power cables to the system and apply
power. For instructions, see “Connecting the power cables to the
system” on page 25.
Complete the server setup. For instructions, see “Completing the server setup” on
page 27.
Installing the factory-racked server
You might need to install the factory-racked server. Use this procedure to perform this task.
To install a server that is already in a factory-installed rack, complete the following high-level tasks:
Table 4. Tasks to install factory-racked server
Task Where to find associated information
Check the
prerequisites. For more information, see “Prerequisite for installing the IBM Power 750 (8408-E8D) and IBM
PowerLinux 7R4 (8248-L4T)” on page 1.
Perform the
inventory. For more information, see “Before you begin” on page 2.
32
Power Systems: Installing the IBM Power 750 (8408-E8D) and IBM PowerLinux 7R4 (8248-L4T)