IBM PC 300GL Types 6275, Using Manual

Page: 98 / 154

POST Message Description
1801 A PCI adapter has requested memory resources that are not available.
Action:
1. Make sure that all ISA legacy adapters are set correctly in the
Configuration/Setup Utility program. If the memory resource settings
are not correct, change and save the settings. Setting the resources
used by ISA legacy adapters to Not available enables the Plug and
Play function to configure around the legacy adapters.
For background information on PCI, ISA, Plug and Play, and legacy
(non-Plug and Play) adapters, refer to Installing Options in Your Personal
Computer. For information about required memory resource settings
for ISA legacy adapters, refer to the documentation that comes with
these adapters. For instructions on using the Configuration/Setup
Utility program, see Chapter 5, “Using the Configuration/Setup Utility
Program” on page 39.
2. Make sure that switches on all ISA legacy adapters are set correctly.
For information about switch settings, refer to the documentation that
comes with the ISA legacy adapters.
3. If all memory resources are being used by ISA legacy adapters, you
might need to remove an ISA legacy adapter to make memory
available to the PCI adapter you want to install. For instructions on
removing adapters, see Installing Options in Your Personal Computer.
Note: If you remove an ISA legacy adapter, set the memory resources
used by the removed adapter to Available before installing
another adapter.
4. If you have other PCI or Plug and Play adapters installed, you might
need to remove one of these adapters to make memory available to the
PCI adapter you want to install.
If the problem cannot be isolated and corrected, have the computer
serviced.
84
Using Your Personal Computer