7
x
Displaying the input signal
The horizontal and vertical frequencies of the input signal are
displayed in the main MENU. If the signal matches to one of the
recommended VESA timing modes, the resolution is also
displayed.
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
1
Press the
m
,
M
,
<
, or
,
button.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
2
Press the
m
or
M
button to adjust the brightness (
),
and the
<
or
,
button to adjust the contrast (
).
If no adjustments are made, the menu disappears
automatically after about 3 seconds.
Adjusting the size and the centering
of the picture (SIZE/CENTER)
1
Press the
button.
The main MENU appears on the screen.
2
Press the
m
or
M
button to highlight
SIZE/CENTER and press the
button.
The SIZE/CENTER menu appears on the screen.
3
First press the
m
or
M
button to select the desired
adjustment item. Then press the
<
or
,
button to
adjust the setting.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
60 . 0 kHz / 75Hz
1024 768
the horizontal
and vertical
frequencies of
the input
signal
Select
To
shift the picture to the left or right
shift the picture up or down
enlarge or reduce the picture width
enlarge or reduce the picture height
enlarge or reduce the picture width and height
proportionally
2 6
2 6
BR I GHTNESS / CONTRAS T
the resolution
of the input
signal
