4
Getting Started
to a power outlet
to AC IN
Power cord
Setup
This monitor works with platforms running at horizontal
frequencies between 30 and 107 kHz.
Step 1: Connect the monitor to the
computer
With the computer switched off, connect the video signal
cable to the video output of the computer.
Note
Do not short the pins of the video signal cable.
Step 2: Connect the power cord
With the monitor switched off, connect one end of the
proper power cord for your local supply to the monitor and
the other end to a power outlet.
Step 3: Turn on the monitor and computer
The installation of your monitor is complete.
Note
If “OUT OF SCAN RANGE” or “NO INPUT SIGNAL” appears on
the screen, see “Warning Messages” on page 16.
to a computer with
an HD15 video output
to a computer with
a 13W3 video output
9
Video input 2 connector (13W3 cable)
Inputs RGB video signal (0.700 Vp-p, positive).
*
Pins serve a dual purpose as combined sync input and as H.sync
input if V.Sync is present on pin no. 9.
** Display Data Channel (DDC) Standard by VESA
Note
If you use a computer or video board of high output level (about 1.0
Vp-p), you may not be able to obtain the optimum display. In such
case, try decreasing the picture contrast, or use a computer or video
board with a lower output level.
Pin No.
A1
A2
A3
1
2
3
Signal
Ground
C.Sync*
––
Bi-Directional
Data (SDA)**
DDC + 5V**
V.Sync
Ground
Signal
Red Video &
Ground
Green Video &
Ground
Blue Video &
Ground
––
Data Clock
(SCL)**
––
(13W3)
(HD15)
(13W3)
(HD15)
Pin No.
4
5
6
7
8
9
10
A1
A2
A3
1
2
3
4
5
6
7
8
9 10
