IBM NetVista A22p, Quick Reference

Page: 23 / 72

10.
Connect the power cords to properly grounded electrical outlets.
Note: For more information about connectors, see Access IBM.
Turning on power
Turn on the monitor and other external devices first. Turn on the computer.
When the power-on self-test (POST) is finished, the IBM logo window closes. If
your computer has preinstalled software, the software installation program
starts.
If you experience any problems during startup, see “Chapter 4.
Troubleshooting and diagnostics” on page 19 and “Chapter 5. Getting
information, help, and service” on page 25.
Finishing the software installation
Important
Please read the license agreements carefully before using the programs
on this computer. These agreements detail your rights, obligations, and
warranties for the software on this computer. By using these programs,
you accept the terms of the agreements. If you do not accept the
agreements, do not use the programs. Instead, promptly return the entire
computer for a full refund.
After you start the computer for the first time, follow the instructions on the
screen to complete the software installation. If you do not complete the
software installation the first time the computer is turned on, unpredictable
results might occur. When the installation is complete, click
Start
→
Access IBM
to learn more about your computer.
Using the Software Selections CD
The Software Selections CD contains tools such as virus-protection software,
network-management software, Internet tools, and tools for digital subscriber
line (DSL) connectivity.
Chapter 2. Setting up your computer
9