IBM Netfinity, User Manual, Page: 24 / 42

1-12
Netfinity® Gigabit Ethernet Adapter User’s guide
Note: Intensity Gigabit adapters that are members of a Failover Team can be
configured to support VLANs. However, VLANs cannot be configured
for a standalone Intel LAN on motherboard (LOM) or a Failover Team
that includes a LOM.
5. In the Netfinity Gigabit Ethernet Adapter Device Driver Properties window, click any
tab to access its options.
If you click the Failover Team Configuration tab but there are no Failover Teams or
VLANs currently configured, the following window opens:
Click Yes to continue Failover Team configuration.
If there are no teams configured, you are prompted to confirm that you want to create
a new Failover Team. Click Yes to continue, or No to abort Failover Team
configuration.
6. When you have completed all desired configuration, click Close to accept
the settings.
7. In the Network window, click Close.
8. When you are prompted to restart your computer, click Yes. Your computer restarts,
using the new configuration settings.
Note: If you modify any configuration parameters, you must restart your computer
before the changes will take effect. If you make changes and do not restart,
you might experience configuration problems. If no configuration changes
have been made, you can click No to close the configuration session without
restarting your computer.