IBM Netfinity ServeRAID-4L Ultra160, User Reference

Page: 18 / 114

ServeRAID-4L controller
The ServeRAID-4L controller has one independent SCSI channel connector:
Channel 1. This SCSI channels supports up to 15 physical devices.
You can attach internal SCSI devices to the Channel 1 connector. You can attach
external SCSI devices to the Channel 1 connector.
Note: The ServeRAID-4L controller uses the module (P/N 38L3386) containing a
lithium battery.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water.
v
Heat to more than 100 C (212 F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Internal Channel 1
External Channel 1
Figure 1. ServeRAID-4L controller
4
IBM
®
Netfinity
®
: ServeRAID
™
-4L Ultra160 SCSI Controller User’s Reference