IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 41 / 192

Notes:
a. Some operating systems have size limitations for logical drives. Before you
save the configuration, verify that the size of the logical drive is appropriate
for your operating system. See your operating-system documentation for
more detailed information.
b. To change the configuration, click Modify arrays or Modify logical drives.
5. Click Apply to accept and save the configuration. The configuration is saved in
the ServeRAID controller and in the physical drives.
6. If you have multiple controllers, for each controller repeat steps 1 on page 26
through step 5.
7. When you have completed configuration, you can change to Information mode
and change controller settings. See “Using Information mode” on page 33 for
more information. If you do not want to change any settings, exit the ServeRAID
Manager program and remove the CD from the CD-ROM drive.
8. Restart the server.
9. Continue with “Step 4: Installing device drivers” on page 33 to install the
ServeRAID device driver while installing your operating system.
Note: If you are configuring your startup (boot) ServeRAID controller, you must
install the device driver while installing the operating system.
Using Custom configuration: To use Custom configuration:
Note: If the Express configuration mode or Custom configuration mode radio
buttons do not display on the right panel, click on the tool bar.
1. In the Main Tree, click the ServeRAID controller that you want to configure.
2. Click the Custom configuration radio button.
3. Click Next. The Create arrays window opens:
Chapter 2. Installing and configuring ServeRAID controllers
27