IBM Netfinity ServeRAID-4H Ultra160 User Reference Download Page 28

Page: 28 / 192

Command-line programs. These command-line programs are available in the
following directory:

:/PROGRAMS/

operatingsystem

/CMDLINE

where d is the CD-ROM drive and operatingsystem is the specific operating
system you are using in the ServeRAID installation.

ServeRAID files needed to install Microsoft Cluster Service (MSCS) when using
Microsoft

Windows

or Windows 2000 and an IBM ServeRAID-4H Ultra160

SCSI controller. These files are available in the following directory:

:/PROGRAMS/WINNT/CLUSTER

where d is the CD-ROM drive.

The IBM ServeRAID Device Drivers diskette contains the following:

Device drivers for Microsoft Windows NT, Windows 2000, IBM OS/2

, Novell

NetWare, and Red Hat Linux 6.1

DOS CD-ROM drive device drivers

The IBM ServeRAID Device Drivers for SCO Operating Systems - UnixWare HBA
and OpenServer BTLD diskette contains the following:

Device drivers for SCO OpenServer 5.0.5

Device drivers for SCO UnixWare 7.1

Downloadable files from the World Wide Web

You can download new and updated files for the IBM ServeRAID and Clustering
products from the IBM Support Web site:

http://www.ibm.com/pc/support/

To access ServeRAID and Clustering support, follow these steps:

1. Click Servers on the IBM Support page. The IBM Netfinity and PC Server

Support page appears.

2. Select ServeRAID or Clustering from the Family list box. The ServeRAID or

Clustering Support page appears.

3. On this page, you can select from the following categories in the left margin:

Downloadable files

Download the latest versions of Clustering software, the ServeRAID
Manager program, BIOS/firmware, device driver updates, and other
important information.

Hints and tips

Obtain useful information for the IBM Clustering and for ServeRAID
products and troubleshooting potential problems.

Online publications

Download the installation and user’s guides, references, redbooks, and
other IBM publications.

You can also review information on parts, products, and software.

IBM

Netfinity

User’s Reference: ServeRAID

™

-4H Ultra160 SCSI Controller

Summary of Contents for Netfinity ServeRAID-4H Ultra160

































































































































































































Search results

Summary of Contents for Netfinity ServeRAID-4H Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4H Ultra160

Brands by name

Popular brands

IBM Netfinity ServeRAID-4H Ultra160, User Reference

Search results

Summary of Contents for Netfinity ServeRAID-4H Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4H Ultra160

Brands by name

Popular brands