IBM Multiprise 3000 S/390, Installation Manual

Page: 94 / 175

Licensed Internal Code Changes (Hardware Management Console)
1 Read this before proceeding
During installation, you should ensure that your
system has all the necessary changes to the
licensed internal code. It is recommended that you
obtain a System Update Level (SUL) optical
cartridge (Part 38F8645) which contains changes
to the licensed internal code. The procedure that
follows provides you with instructions for retrieving
and installing all the changes to the internal code
for the Hardware Management Console. Later in
this chapter, another procedure will provide the
changes to the internal code for each Support
Element.
If there are new internal code changes available, or
if you are not sure if there are any new internal
code changes available, go to “Retrieving Internal
Code Changes (Hardware Management Console)”
on page 6-17
If there are no new changes available, go to
“Licensed Internal Code Changes (Support
Element)” on page 6-21.
6-16
Installing the System