IBM Manager 3105, Appliance Manual

Page: 33 / 52

Chapter 6. Field replaceable units
A number of components can be replaced in the field.
Replacement parts
Contact IBM Support for replacement parts for the appliance.
The following customer serviceable replacement parts are available:
• PSU, RPS, 750 W, 110-240VAC, 12 VDC, FPS
• 2.5" OS/data drive
The following customer serviceable upgrades are available:
• SFP+/QSFP optical modules
See the Field Replaceable Units Reference Guide for a complete list of available drives.
Replacing external front components
Procedure to replace a drive in the operating system/data RAID array.
Before you begin
In the Manager 3105 Appliance, the OS/data drives are in a RAID 5 configuration. This allows for one
drive failure with no loss of data. Replacing a failed drive will automatically start the RAID rebuilding
process.
Procedure
1. Locate the drive by location label or the solid amber failure LED.
2. Press the release button on the drive carrier.
This action extends the carrier handle, as shown in the following figure.
Figure 17. Removing a drive from the chassis
3. Pull the drive carrier out of the chassis by using the handle.
4. Make sure that the drive carrier latch on the new drive is open.
5. Push the drive carrier with the new HDD into the chassis until significant resistance is encountered.
6. Re-close the latch to fully seat the drive carrier into the chassis.
©
Copyright IBM Corp. 2016, 2020 19