Mainboard User’s Manual
Optional Extension Brackets
For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note:
All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Extended USB Module
This module bracket has two USB ports for more USB devices
(USB port 3-4).
1. Locate the USB2 header on the mainboard.
2. Plug the bracket cable onto the USB2 header.
3. In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the
opening. Use the screw that held the slot cover to secure the
extension bracket in the chassis.
14
USB2
1
Summary of Contents for M841LR
Page 4: ...Mainboard User s Manual IV ...
Page 22: ...Mainboard User s Manual 18 ...
Page 31: ...3 BIOS Setup Utility 27 ...
