IBM L5U, Maintenance Information

Page: 218 / 295

9-24
TS3400 Tape Library Maintenance Information
8. On the front panel, remove the front bezel. See “Replacing the Front Bezel” on
page 9-14.
9. Remove the five screws securing the library door ( in Figure 9-23) to the library
frame.
Figure 9-23. Library door screw locations
10.
Pull the library door open.
11.
Placing your fingers over the bottom front lip of the Accessor assembly, pull the
Accessor assembly to the front of the library.
12.
Disconnect the two flat cable connectors on the front right of the Accessor
assembly (Figure 9-24). Release the connector lock by pulling out the top and
bottom edges of the lock tab ( in Figure 9-25), and then withdraw the flat cable
out of the connector.
Note:
See Figure 9-25 for a close-up view of the flat cable as it mates with the
connector. The cable contacts are aligned with the connector contacts and
are held in place by pressing the slide lock in to wedge the cable and
connector together.
1
a34z0006
1
1