IBM iSeries 5075, Setting Up

Page: 26 / 49

__ f. Press the Enter push button on the control panel.
__ g.
Press the Increment/Decrement push button until
S
appears
in the Function/Data display.
__ h. Press the Increment/Decrement push button until
01
appears
in the Function/Data display.
01 B N S
should appear in the Function/Data display. If it
does not, repeat steps 6a on page 15 through 6h.
__ i. Press the Enter push button on the control panel.
__ j. Go to step 9.
__ 7.
Look at the Function/Data display on the control panel. See “Appendix C.
System unit control panel” on page 27 if you need information about your
control panel.
__ 8. Does
01 B V=S
appear in the Function/Data display?
Yes No
↓
Do the following:
__ a. Press the Mode Select button until the Manual mode
indicator (a small hand) lights up.
__ b. Press the Increment/Decrement push button until
02
appears
in the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d.
Press the Increment/Decrement push button until
B
appears
in the Function/Data display.
__ e. Press the Enter push button on the control panel.
__ f.
Press the Increment/Decrement push button until
S
appears
in the Function/Data display
__ g. Press the Mode Select button until the Normal indicator
(
OK ) lights up.
__ h. Press the Increment/Decrement push button until
01
appears
in the Function/Data display.
__ i. Press the Enter push button on the control panel.
01 B S
should appear in the Function/Display panel. If it
does appear, not repeat steps 8a through 8h.
__ j.
Go to step 9.
__ 9. Power on your system unit by pushing the white power-on button.
Note: The time needed to do a complete IPL varies depending on AS/400
model and configuration.
__ 10. Sign on your system unit. Ensure that you have service tools authority.
__ 11. Go to “Chapter 5. Verifying Your New Configuration” on page 17.
16
Setting Up Your 5075 Expansion Unit V4R5