IBM Infoprint 1410, User Manual, Page: 32 / 254

Faxing information
29
Printing, copying, faxing, and scanning
4
Press the down arrow button until
Options
is highlighted, and then press
✓
.
5
Press the down arrow button until
Duplex
is highlighted.
6
Use the left and right arrow buttons to set
Duplex
to either
Long Edge
or
Short Edge
. For
more information on long edge and short edge, see the illustrations on page 58 .
7
Press Start. The first side is scanned.
8
Open the scanner flatbed cover, turn the original document over, close the cover, highlight
Scan Next Page
, and press
✓
.
9
Highlight
Done
, and press
✓
.
Interrupting a job to make a copy
Unless disabled by your support person, printing may be interrupted to make a copy quickly.
1
Press the Stop button to stop the MFP.
2
Load the original document face up in the ADF or face down in the scanner flatbed. See
Loading scan media in the ADF and Loading scan media in the scanner flatbed for more
information and illustrations for orientation.
3
Press the right arrow button to highlight
Insert immediate copy job
, and press
✓
.
4
Set any values for Copies or any other setting that you want.
5
Press Start.
Scanning ...
appears and the copy prints.
Canceling a copy
Once you have started a copy job, if you need to cancel it, use the navigation arrow buttons to
highlight
Cancel
, and then press
✓
.
Faxing information
To send a quick fax, see Quick fax . For all other fax procedures, you must press the Fax button to
enter the Fax menu.
Quick fax
If you have a fax destination stored as a shortcut, you can send a fax to that destination very quickly
from the Home screen. Press #, and then enter the shortcut number on the numeric keypad. Load