IBM Infoprint 1410, User Manual

Page: 136 / 254

Administration
133
7
Administration
The following sections are for a support person in charge of the MFP.
Since many people could be using the MFP, an administrator may choose to lock the menus to keep
others from changing menu settings from the control panel.
Disabling control panel menus
To disable the control panel menus so that changes cannot be made to the MFP default settings:
1
Turn the MFP off.
2
Press and hold the Start and Stop buttons while turning the MFP on. Release the buttons
when the
Performing Self Test
message is displayed.
3
Press the down arrow button until you reach
Panel Menus
, and then press
✓
.
4
Press the right arrow button until you reach
Disable
, and then press
✓
.
Submit
is
highlighted.
5
Press
✓
.
Submitting changes
appears briefly and you are returned to the same screen where
Panel Menus
is located.
6
Press the down arrow button until
Exit Config Menu
is highlighted, and then press
✓
.
Resetting the printer
appears briefly.
The menus are disabled, the MFP exits the Config Menu and restarts.
Enabling menus
1
Repeat steps 1 through 3 in Disabling control panel menus .
2
Press the left arrow button once so you reach
Enable
and then press
✓
.
Submit
is
highlighted.