Installation and user’s guide
Introduction
The IBM iL2120 and iL2220 multimedia projectors are specifically designed for
multipurpose use. They generate crisp, clear images using Digital Light
Processing
™
(DLP) technology, and feature an M1-DA connector for easy,
built-in digital/analog and USB connectivity. They are easy to connect, easy to
use, easy to transport, and easy to maintain. The iL2120 has native SVGA 800
x 600 resolution, the iL2220 has XGA 1024 x 768 resolution. The user-interfaces
of the two products are identical; information in this user’s guide applies to
both products.
The projector is compatible with these major broadcast video standards:
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. It automatically
adjusts to optimize its performance for the incoming video.
Image resolution
iL2120
The SVGA resolution of the iL2120 projected image is 800 x 600. The projector
cannot compress screen resolutions above 1024 x 768. If your computer screen
resolution is higher than 1024 x 768, reset it to a lower resolution before you
connect the projector.
Note:
The iL2120 projector automatically expands 640 x 480 images to 800 x
600. You can display these images at their native resolutions by turning
off the Auto Resize feature. See “Resize” on page 21 for more
information.
iL2220
The XGA resolution of the iL2220 projected image is 1024 x 768. The projector
cannot compress screen resolutions above 1024 x 768. If your computer screen
resolution is higher than 1024 x 768, reset it to a lower resolution before you
connect the projector.
Note:
The iL2220 automatically expands 640 x 480 and 800 x 600 images to
1024 x 768. You can display these images at their native resolutions by
turning off the Auto Resize feature. See “Resize” on page 21 for more
information.
© Copyright IBM Corp. 2000
1
