ZTEST HOTR START O-14
HOTR0002E Ordinal number too high- must be 0x0-0x13+
ZTEST HOTR START FILEADD-00000000CC03A802 O-1
BPKD0061E 07.33.16 ZHOTR, TOO MANY CHARACTERS IN FILEADD PA
Normal Cases: (HOTS/HS64)
ZTEST HOTS HELP
CSMP0099I 09.28.09 010000-B ZTEST HOTS HELP+
CSMP0097I 09.28.09 CPU-B SS-BSS SSU-HPN IS-01
HOTS0001I Valid HOTS parameters are:
SET FACID-cc ORDINAL-xx FILEADDR-hh <ALL. <FCT.
<NORMAL. <SNIPPETS. STate-xx SErvice-xx
HELP
ALL overrides ORDINAL, FILEADDR overrides FACID
NORMAL overrides SNIPPETS, SNIPPETS overrides STATE/
The following messages are chronologically related.
ZTEST HOTR START
HOTR0009I Driver started for FACE ID: #HOTREC ordinal: 0
ZTEST HOTR STAT
HOTR0030I STATUS was requested for FACE ID #HOTREC Ordinal 0
CSMP0097I 16.54.27 CPU-B SS-BSS SSU-HPN IS-01
HOTR0016I Driver running on FACE ID #HOTREC Ordinal 00000000
The file-count is: 00002F77
Snippets are not active at this time
This record is not running EHT
This record is running SVT Mode+
ZTEST HOTS SET SNIPPETS
HOTS0009I Driver for FACE ID: #HOTREC all ordinals was told to:
RUN ALL SN
ZTEST HOTR STAT
HOTR0030I STATUS was requested for FACE ID #HOTREC Ordinal 0
CSMP0097I 16.52.47 CPU-B SS-BSS SSU-HPN IS-01
HOTR0016I Driver running on FACE ID #HOTREC Ordinal 00000000
ZTEST HOTX
© Copyright IBM Corp. 2006
HOTX Driver User's Guide 11
