IBM Gigabit Fibre Channel PCI, Installation And Using Manual

Page: 29 / 52

<controlwks>
is the name of the Control Workstation recognized by the nodes.
<lppsource_name>
is the name you recorded earlier in “Checking System
Prerequisites” on page 14.
__ 4. Perform a preview of the files to be installed on the nodes by typing the following
at the system prompt:
dsh "installp -p -acqXd /mnt device driver 2>&1" | more
device driver is the fileset that must be installed for the adapter. The list includes:
v
devices.pci.df1000f9
__ 5. Install the device driver by typing the following at the system prompt:
dsh "installp -acqXd /mnt device driver 2>&1" | more
device driver is defined in the previous step.
After the device driver is installed on the node, contact your service provider to
have the adapter installed.
Chapter 4. Installing the Device Driver on the RS/6000 SP System
19