IBM F16, User Manual

Page: 15 / 123

AC grounding
DANGER
An electrical outlet that is not correctly wired could place a hazardous
voltage on the metal parts of the system or the products that attach to the
system. It is the customer’s responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock. (1)
Environmental notices and statements
This section describes the environmental notices and statements.
Laser safety
This unit might contain a single-mode or a multimode transceiver Class 1 laser
product. The transceiver complies with IEC 825-1 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated under the recommended operating
conditions.
This equipment contains Class 1 laser products and complies with FDA radiation
Performance Standards, 21 CFR Subchapter J and the international laser safety
standard IEC 825-2.
Usage restrictions
You must terminate the optical ports of the modules with an optical connector or
with a dust plug.
Fire suppression systems
A fire suppression system is the responsibility of the customer. The customer’s own
insurance underwriter, local fire marshal, or a local building inspector, or both,
SJ000325
PN
18P4036
> 240 V ~
PSU1 PSU2
Figure 2. Linecord caution label
SJ000327
In the United States use only GBIC units or Fibre-Optic products that
comply with FDA radiation performance standards, 21 CFR Subchapter J.
Internationally use only GBIC units or Fibre-Optic products that comply
with IEC standard 825-1. Optical products that do not comply with these
standards may produce light that is hazardous to the eyes.
CAUTION:
Safety and environmental notices
xiii