IBM EXN4000, Installation And Setup Instructions

Page: 13 / 18

Header Header
1
Shelf ID - close-up view
2
Mute button
3
Shelf ID
4
In port activity LED
5
Out port activity LED
6
In port
7
Out port
8
Fault LED
9
Gb switch (set to 2Gb)
Grounding expansion units
If only one expansion unit is being used, go to Step 6, "Installing the power
cables".
If two or more expansion units are being used continue with the following.
Using the grounding kit, fasten the lug at one end of the 0.25m grounding cable to
one of the two threaded inserts (adjacent to the power supply receptacles as
indicated by a ground symbol) at the back of the expansion unit using the M5 x
0.5-inch screw.
If additional expansion units need to be grounded, continue attaching the
grounding cables from unit to unit, overlaying the hole on one end of the
grounding cable from one to the next.
2
1Gb 2Gb
2
4Gb
2Gb 4Gb 1Gb ELP
2
3
4
5
6
7 8
9
1
exn40005
Figure 6. Setting the speed switch
Installation and setup instructions
5