IBM eserver xSeries 440, User Manual

Page: 48 / 84

36
xSeries 440:User’s Guide
Complete the following steps to manually install the Windows 2000 ASM device
drivers.
1. Open a command prompt.
2. If you are installing from a diskette, type: A:\WIN2000\SETUP , where A is the drive
letter of the diskette drive.
3. If you are installing from a CD, type:
D:\DD\WIN2000\SETUP
, where D is the drive
letter of the CD-ROM drive.
4. Follow the directions that display on the screen.
5. Go to “Configuring the remote control password:” on page 37.
Installing Windows NT ASM device drivers: Choose one of the following methods to
install the ASM device drivers for Windows NT:
• Non-interactive
The non-interactive method for installing the ASM device drivers accepts the
default values for any window prompts that appear. You are prompted to respond
only if an error occurs during installation.
• Interactive
The normal (interactive) method for installing the ASM device drivers prompts you
with instructions and waits for you to respond before continuing with the
installation.
Note: If IBM Netfinity Director, IBM Director, UM Services, or IBM Netfinity Manager
is running on the server, stop the system-management application before
proceeding.
Using the non-interactive method: Complete the following steps to use the non-
interactive method.
1. Open a Windows NT command prompt; then, type one of the following
commands:
• If the installation is from a diskette, type:
A:\NT\SETUP -q
(where A is the drive letter assigned to the diskette drive).
Press Enter.
• If the installation is from a CD, type:
D:\DD\NT\SETUP -q
(where D is the drive letter assigned to the CD-ROM drive).
Press Enter.
2. Follow the instructions that appear in the window.
3. Go to “Configuring the remote control password:” on page 37.