Removing the covers
Locate the diagram of the unit you are working on:
__
“270, 810 or 820 system units”
__
“830, 840, 870, 890, SB2, SB3, 5074, 5079, and 5094 units” on page 10
__
“Accessing units in a rack” on page 11
270, 810 or 820 system units
To access the PCI card location, you need to remove the back cover, if you have
one, and the side cover:
__ 1.
Place your hand near the bottom of the back cover and lift up and out.
__ 2.
Attention:
If you are removing the side cover while the server is powered
on, errors may occur due to electromagnetic interference.
Remove the right side cover (view from back) by loosening the thumbscrews
and sliding the cover from front to back until it stops.
__ 3.
Pull the cover out.
© Copyright IBM Corp. 2000, 2003
9
