IBM EN4093R, User Manual

Page: 20 / 60

Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
– Do not remove the covers. Removing the covers of the laser product
could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.
– Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view
directly with optical instruments, and avoid direct exposure to the beam.
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1
`
Installing the SFP+ module
The SFP+ module provides two fiber-optic cable connectors for connecting to
external ports.
To install an SFP+ module, complete the following steps.
1. Read the safety information that begins on page v and “Installation guidelines”
on page 5.
2. If you have not already done so, touch the static-protective package that
contains the SFP+ module to an unpainted metal surface of the IBM Flex
System chassis or an unpainted metal surface on any other grounded rack
component in the rack in which you are installing the switch for at least 2
seconds.
3. Read the information in “Handling the SFP+ and QSFP+ module” on page 9.
4. Remove the SFP+ module from its static-protective package.
5. Remove the protective cap, if one is installed, from the SFP+ module port
where you are installing the SFP+ module and store it in a safe place.
10
EN4093 and EN4093R 10 Gb Scalable Switch: User's Guide