3)
Using a #2 Phillips screwdriver or 7 mm socket, remove the four M5 screws (C) that attach the
shipping bracket (A) to the left and right flanges of the rack frame. Lift the bracket out and
away from the rack frame.
Tip:
Save the bracket for any future reinstallation or shipping of the drawer that might be
required.
c.
Continue with “Connecting an EMX0 PCIe3 expansion drawer to your system” on page 17.
6.
If you need to install your EMX0 PCIe3 expansion drawer into a rack, complete the following steps:
a.
Ensure that you have the following items before you start your installation:
v
#1 and #2 Phillips screwdriver
v
Flat-head screwdriver
v
Rack with four Electronic Industries Alliance (EIA) units of contiguous space
Note:
If you do not have a rack that is installed, install the rack. For instructions, see Racks and
rack features (http://www.ibm.com/support/knowledgecenter/POWER8/p8hbf/
p8hbf_8xx_kickoff.htm).
v
Help to lift the EMX0 PCIe3 expansion drawer into the rack, which requires three people.
b.
Determine where to install a new EMX0 PCIe3 expansion drawer. Consider several elements that
include size, security, and environmental factors. For more information, see Site preparation and
physical planning (http://www.ibm.com/support/knowledgecenter/POWER8/p8ebe/
p8ebe_kickoff.htm).
c.
Continue with “Completing inventory for the EMX0 PCIe3 expansion drawer.”
Completing inventory for the EMX0 PCIe3 expansion drawer
Learn how to complete inventory for the EMX0 PCIe3 expansion drawer.
To complete inventory, complete the following steps:
C
B
A
P8EGP508-0
Figure 1. Removing the shipping bracket
Installing an EMX0 PCIe Gen3 I/O expansion drawer
3
Summary of Contents for EMX0 PCIe3
