manualshive.com logo in svg

IBM Elastic Storage System 5000 Series, Hardware Manual

Share
Download
IBM Elastic Storage System 5000 Series Hardware Manual Download Page 65

Figure 31. Drive locations in a Model 092 expansion enclosure

The drive slots must be populated sequentially, starting from the back-left corner position (slot 1,

grid A1). Sequentially install the drive in the slots from left to right and back row to front. Always

complete a full row before you install drives in the next row.
For example, in Figure 32 on page 51, the drives are installed correctly. Drives are installed in slots

1 -14 of row A and the installation continues in slot 15 in row B.

Figure 32. Correct drive installation

In the first Model 092 expansion enclosure slots, 1 and 14 contain SSDs for the LogTip backup. For

more information about the LogTip backup, see IBM Spectrum Scale RAID guide.
In Figure 33 on page 52, the drives are not installed correctly. Slot 1 (A1) does not contain a drive.

In addition, drives are installed in row B even though row A contains empty drive slots.

Chapter 5. Installing Model 092 expansion enclosure  51

Summary of Contents for Elastic Storage System 5000 Series







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands