8.
Replace the memory slot cover over the memory slot,
aligning the back side of the cover first; then tighten the
screw.
Attention:
When you have added or upgraded a memory
card, do not use your computer until you have closed the
cover. Never use the computer with the cover open.
9.
Put the battery back in place and turn the computer over
again.
To make sure that the DIMM is installed correctly, do as follows:
1.
Turn the computer on.
2.
While the “Press F1 for IBM BIOS Setup Utility” message is displayed at the lower-left area of the screen, press the F1 key.
The IBM BIOS Setup Utility screen appears. The “Installed memory” item shows the total amount of memory installed in
your computer. For example, if you install a 64-MB DIMM into a computer whose built-in memory is 64 MB, the quantity
shown in “Installed memory” should be 128 MB.
9
All manuals and user guides at all-guides.com
