IBM BNT, Installation Manual

Page: 51 / 88

Chapter 8. Parts listing
Replaceable components are of three types:
v
Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
v Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
v
Field replaceable unit (FRU): FRUs must be installed only by trained service
technicians.
For information about the terms of the warranty, see Appendix B, “Warranty,” on
page 45.
The replaceable components in the following table are Tier 1 CRUs. If other
BladeCenter components require replacement, see the following documentation
that comes with these devices:
v
BladeCenter Problem Determination and Service Guide or Hardware Maintenance
Manual and Troubleshooting Guide
v
Installation and User’s Guide or Installation Guide
Part CRU number (Tier 1)
BNT Virtual Fabric 10Gb Switch Module for IBM
BladeCenter assembly 46C7194
Serial console cable 43X0510
IBM 10 Gb SFP+ small-form-factor pluggable module, SR
(850 nm) 44W4411
I/O module filler, single high 31R3303
© Copyright IBM Corp. 2009, 2010
39