IBM BladeCenter 1/10 Gb Uplink Ethernet..., Installation Manual

Page: 37 / 58

Chapter 7. Parts listing
Replaceable components are of three types:
v Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged for
the installation.
v
Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
v Field replaceable unit (FRU): FRUs must be installed only by trained service
technicians.
For information about the terms of the warranty, see the warranty that ships with
your switch module.
The replaceable components in the following table are Tier 1 CRUs. If other
BladeCenter components require replacement, see the following documentation that
comes with these devices:
v BladeCenter Problem Determination and Service Guide or Hardware
Maintenance Manual and Troubleshooting Guide
v
Installation and User’s Guide or Installation Guide
Part CRU number (Tier 1)
IBM BladeCenter 1/10 Gb Uplink Ethernet Switch Module
assembly 44W4407
Serial console cable 43X0510
IBM 10 Gb SFP+ small-form-factor pluggable module, SR
(850 nm) 44W4411
© Copyright IBM Corp. 2012
25