__ 8.
Install the optical cables by performing the following steps:
__ a.
Locate the optical connector that is labeled
0
on the back of the
expansion unit.
__ b.
Remove the terminating plugs from the optical connector.
Attention:
When installing the cable connectors, use extreme care to
prevent damaging the housing or scratching the ends of the fiber optic
cables.
__ c.
Remove the optical plug dust covers from the optical cable you are
installing.
__ d.
Install the optical cable that is labeled
0
into the connector.
__ e.
Repeat steps 8a through 8d to install the optical cable that is labeled
1
into the optical cable connector that is labeled
1
.
__ 9.
Find the power cord that you unpacked with the expansion unit.
__ 10.
Locate the power connector on the back of the expansion unit.
__ 11.
Remove the label that covers the power plug connector.
Figure 8. 5065 connector locations
RV2D880-0
Figure 9. Removing optical plug dust covers
Chapter 2. Setting up your 5065 Expansion Unit
9
Summary of Contents for AS/400e
