IBM Aptiva 2190, Hardware Maintenance Service, Page: 44 / 165

1-4
Multimedia
•
One pair of internal speakers.
Power Management
•
Compliant to ACPI and supports display power management signaling
(DPMS) monitor.
•
Software shutdown by Windows 98.
•
System enters standby mode if any of following conditions are met:
−
Execute standby from the Windows 98 Start menu
−
Press system power button if it is set to act as standby function.
See "Power Management Setup on page 1-19.
−
Standby timer set in the Windows 98 power utility timer elapses
without system activity.
•
Monitor enters standby mode if:
−
Windows 98 power utility timer elapses
−
System sleep timer elapses
Power Supply
•
95-watt switchable high/low voltage power supply.
•
Standard SFX power supply with +5V and +3.3V standby power
Internal Cabling
•
Two 40-pin ribbon cables for hard disk drive and CD-ROM drive.
•
One 34-pin ribbon cable for AT diskette drive.
•
One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED).
•
One 3-pin (3-wire) cable for power light-emitting diode (LED).
•
One 2-pin (2-wire) cable for power switch.
•
One 16-pin game port cable.