IBM AnyPlace 4836, Planning, Installation And Service Manual

Page: 28 / 108

3. Align the MSR such that the connectors are slightly above their matching slots
on the 4836. Slide the MSR downward into position, being careful not to pinch
the MSR cable.
4. Plug the USB cable into the connector.
5. Lay the grounding strap against the bottom of the opening in the metal shield;
the door will then clamp the strap into place.
Note:
A
in Figure 7 shows the grounding strap, which is folded for the 12 inch
unit, unfolded for the 15 inch unit.
6. Install the hard drive door with MSR latching tab and secure the two screws.
Figure 6. Installing the MSR
Figure 7. Placing the grounding strap
12
Anyplace Kiosk 4836