IBM 9835-415, Deployment Manual

Page: 79 / 126

Hose coverings or protective devices are not provided by IBM. Routing and
protection of the hose assemblies exterior to the rack are your responsibility.
Secondary cooling loop parts and services information
IBM supplies a heat exchanger that is designed for IBM enterprise-server racks, a
hinge kit (for those racks), and an air purge tool. This information provides sources
and information for other parts and services that are needed for correct function
and reliability of the secondary cooling loop.
Miscellaneous parts supplier
Table 18 provides supplier and contact information for miscellaneous secondary
loop parts. You can contact the supplier that is listed in the table for all or some of
the items that are listed, depending on your needs.
Table 18. Miscellaneous secondary loop parts supplier information for customers in North
America, Europe, Middle East, Africa, Asia Pacific
Supplier Parts Contact information
Vette Corporation
v Rear door heat exchangers
(designed for non-IBM
Enterprise racks)
v Cooling distribution units
v Hose kits
v Water treatment
v Chillers
v Raised-floor grommets
Website :
Vette Corp (www.vettecorp.com)
Email :
datacom_facilities@vettecorp.com
Phone
:
877-248-3883 or
508-203-4690
Address :
Vette Corp Datacom Facilities
Division
201 Boston Post Road West
Marlborough, MA 01752
Services supplier
Table 19 on page 58 provides supplier and contact information for services that can
be provided for secondary loop parts.
Chapter 4. Physical installation site requirements
57