IBM 8835 - Eserver 325 - 1 GB RAM, Option Installation Manual

Page: 27 / 62

World Wide Web. For details about installing a RAID adapter, see the
documentation that comes with the adapter.
v If you plan to use a RAID adapter to control internal hot-swap hard disk drives,
disconnect the SCSI cable from the SCSI backplane signal connector (SCSI1) on
the system board and connect it to the RAID adapter. The following illustration
shows the cable routing if you are installing the RAID adapter in PCI-X slot 1.
See the documentation that comes with the RAID adapter for any additional
cabling instructions. That documentation also provides information about
installing the RAID software and configuring the RAID adapter.
SCSI backplane
signal connector
(J8)
to hard disk drives
RAID adapter
SCSI cable
Chapter 2. Installing options
13