Memory Checkout
Customer diagnostics can eliminate defective memory so
no memory error code appears at power-on reset. After
you replace a defective memory module on the system
board or IC DRAM card, run Automatic Configuration.
Otherwise, the new memory will not be recognized. (If you
have to run configuration with your own diskette, be sure
the customer has all the correct option diskettes available.)
Power-off the computer before removing or replacing parts.
001
– Remove all IC DRAM cards from the slots if installed.
– Run the memory tests.
Use the RUN TESTS ONE TIME option.
DID THE MEMORY TESTS END WITHOUT AN ERROR?
Yes No
002
Replace the memory module on the system board.
003
DID YOU REMOVE THE IC DRAM CARD FROM
SLOT 1?
Yes No
004
Go to Step 007.
005
– Reinstall the IC DRAM card into slot 1 and run
Automatic Configuration.
– Run the memory test.
Use the RUN TESTS ONE TIME option.
DID THE MEMORY TESTS END WITHOUT AN ERROR?
Yes No
006
Replace the IC DRAM card in slot 1.
If that does not correct the problem, replace the
system board.
007
DID YOU REMOVE THE IC DRAM CARD
FROM SLOT 1?
Yes No
008
(Step 008 continues)
Model CL57 (8554)
115
