IBM 8364 E series, User Manual, Page: 69 / 150

Date and time
When selected, this screen allows the administrator to view or change the system date
and time. See “Setting the date and time” for instructions.
Note:
The operating system updates the Network Station system time, when the
system is booted from the Server. The operating system will not synchronize date with
the server.
Setting the date and time
You may need to change the date and time on the Network Station after
replacing the lithium battery (see “Exchanging the lithium battery” on
page 20). You can update the date and time through the Network Station
BIOS. Follow the procedure below to change the date and time on the
Network Station.
Setting the date and time:
1. Power up the system.
2. Press the F1 key during the IBM Network Station’s logo displays, and
after the keyboard LEDs have flashed.
Note:
Pressing F1 during the system’s keyboard test causes a false 301
Keyboard Error to display, and a prompt for the administrator
password to appear.
3. Type the administrator password when prompted.
Note: If you do not know the current administrator password, refer to
“Clearing the administrator password and CMOS, creating a
Chapter 9. Configuring the Network Station from the BIOS setup utility
57