IBM 8364 E series, User Manual, Page: 64 / 150

Note: Pressing F1 during the system’s keyboard test causes a false 301
Keyboard Error to display, and a prompt for the administrator
password to appear.
3.
Type the administrator password.
Note: If you want to enter the setup utility and do not know the
password, perform the procedure, “Clearing the administrator
password and CMOS, creating a recovery CompactFlash card, and
reading a CompactFlash card” on page 24.
After the system has validated the administrator password, the main setup
utility screen will appear (see Figure 4 below). You can make changes to the
Network Station’s system defaults at this time.
To see the primary setup utility screens, and some basic configuration
procedures, refer to “Primary setup utility screens”.
Primary setup utility screens
Note: Setup screen references may be different depending on the Network
Station hardware, and date of manufacture.
Figure 4. Configuration/setup utility screen
52
IBM Network Station