IBM 8275-416, User Manual

Page: 71 / 156

VLAN Index
Sequential number of defined VLANs. You can configure 8 VLANs on each
of 4 pages for up to 32 VLANs.
VLAN ID
VLAN identifier. It can be any number from 2 to 4094 (ID 1 is reserved for
the default VLAN).
VLAN Name
An alphanumeric character string of up to 16 characters which identifies the
VLAN. The default name is blank. The name for VLAN ID 1 is always
Default .
VLAN Type
The type can be the Default VLAN, a static VLAN (one that is permanently
configured and defined), or a dynamic VLAN (one that is created by GVRP
registration). A VALN maked as “Dynamic” can be made “Static” by toggling
in the
Type
field when the VLAN is being modified.
Adding or Modifying a VLAN
If you want to add a VLAN, move the cursor to the ADD VLAN command at the
bottom of the panel and press Enter. To modify an existing VLAN, move the cursor
to the line containing the VLAN and press Enter. You will be presented the VLAN
Configuration Menu (Figure 37).
The parameters for this panel are:
Port
This value is not selectable. Indicates by slot ID and port number which port
is controlled by the fields on this line.
Slot ID
This value is not configurable. Indicates by slot ID and port number which
port is controlled by the fields on this line.
Participation
Determines the degree of participation of this port in this VLAN. The values
can be:
v
Include: Indicates this port is always a member of this VLAN. This is
equivalent to registration fixed.
Figure 37. VLAN Configuration Menu
Chapter 4. Using the Terminal Interface
55