![background image](http://html1.mh-extra.com/html/ibm/7383/7383_installation-and-service-manual_3334249112.webp)
3.
Align the flash device with the USB connector on the system board and push it
into the USB connector until it is firmly seated.
4.
Return the retention latch to the locked position by pulling it away from the
system board.
What to do next
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation.”
Completing the installation
Use this information to complete the installation.
About this task
To complete the installation, complete the following steps.
Procedure
1.
If you removed the fan cage assembly, reinstall it (see “Replacing the fan cage
assembly” on page 95).
2.
If you removed the air baffle, reinstall it (see “Replacing the air baffle” on page
97).
3.
If you removed the server cover, replace it (see “Replacing the left-side cover”
on page 98).
4.
Reconnect the cables and power cords (see “Connecting the cables” on page
99).
94
System x3500 M4 Type 7383: Installation and Service Guide
Summary of Contents for 7383
